Product Center

Compact data acquisition chassis equipped with a SeeDAQ data controller; Supports installation of up to 4 FIDES series data acquisition cards, with maximum support for 64 analog input channels, 8 counter input channels, and 4 CAN FD input channels. Max sampling rate: 128KHz/s/ch;; internal hard drive capacity: 256GB,, enabling offline data storage. Dual 6.5G Ethernet ports for cascaded device operation; USB 3.0 output port.

Compact data acquisition chassis equipped with a SeeDAQ data controller; Supports installation of up to 2 FIDES series data acquisition cards, with maximum support for 32 analog input channels, 4 counter input channels, and 2 CAN FD input channels. Max sampling rate: 128KHz/s/ch;; internal hard drive capacity: 256GB,, enabling offline data storage. Dual 6.5G Ethernet ports for cascaded device operation; USB 3.0 output port.

Compact data acquisition chassis; Supports installation of up to 4 FIDES series data acquisition modules, with a maximum of 64 analog input channels, 8 counter input channels, and 4 CAN FD input channels; Maximum sampling rate: 256KHz/s/ch;; Dual 5.5G Ethernet ports for daisy-chain device connectivity; USB 3.0 output port.

Compact data acquisition chassis; Supports up to 8 FIDES series DAQ modules, with a maximum of 128 analog input channels, 16 counter input channels, and 8 CAN FD input channels; Maximum sampling rate: 128KHz/s/ch;; Dual 5.5G Ethernet ports for daisy-chaining devices; USB output available.

Compact data acquisition chassis; Supports up to 4 FIDES series DAQ modules, with a maximum of 64 analog input channels, 8 counter input channels, and 4 CAN FD input channels; Maximum sampling rate: 128KHz/s/ch;; Dual 5.5G Ethernet ports for daisy-chaining devices; USB output available.

Compact data acquisition chassis; Supports up to 2 FIDES series DAQ modules, with a maximum of 32 analog input channels, 4 counter input channels, and 2 CAN FD input channels; Maximum sampling rate: 128KHz/s/ch;; Dual 5.5G Ethernet ports for daisy-chaining devices; USB output available.

8-channel isolated temperature acquisition module; Input modes: voltage, thermocouple; Thermocouple types: K, J, T, R, S, N, E, C, B; Thermocouple range: full range for each type; A/D converter: 24-bit Δ-Σ, 100 samples/second/channel; Input interface: Mini thermocouple connector;

8-channel isolated temperature acquisition module; Input modes: Voltage, Thermocouple; Types: K, J, T, R, S, N, E, C, B; Thermocouple range: Full range for each thermocouple type; A/D converter: 24-bit Δ-Σ, 10KHz sampling rate per channel; Input interface: Mini thermocouple connector;

16 analog input channels, 2 counter input channels, 1 CAN/CAN FD channels Maximum 128KS/s/ channel sampling rate, 24-bit ADC resolution Supports voltage (±10V, ±1V, ±0.1V), voltage/IEPE/full-bridge/half-bridge/quarter-bridge strain gauges, platinum resistance thermometers, and potentiometers for direct input Input coupling: DC, AC: 0,1 Hz, 1 Hz, 3Hz, 10 Hz CAN channels support CAN 2.0 and CAN-FD Data output interface: USB or Ethernet Supply voltage: 9-36Vdc Analog input connector type: RJ45 socket Counter input connector type: Lemo 1B 7-pin CAN channel connector type: DSUB9, male

16 analog input channels, 2 counter input channels, 1 CAN/CAN FD input channels Maximum 128KS/s/ channel sampling rate, 24-bit AD resolution Supports voltage (±10V, ±1V, ±0.1V), voltage/IEPE/strain full-bridge, half-bridge, quarter-bridge/PT100/potentiometer direct input Input coupling: DC, AC: 0,1 Hz, 1 Hz, 3Hz, 10 Hz CAN channels support CAN 2.0 and CAN-FD Data output interface: USB or Ethernet Supply voltage: 9-36 Vdc Analog input connector type: Lemo 1B 10-pin female Counter input connector type: Lemo 1B 7-pin CAN input connector type: DSUB9, male

16 Channel analog input, 2 Channel counter input, 1 Channel CAN/CAN FD input Maximum sampling rate for up to 128KS/s/ channels; 24-bit AD resolution Voltage support: (±10V, ±1V, ±0.1V), direct IEPE input Input coupling: DC, AC: 0,1 Hz, 1 Hz, 3Hz, 10 Hz CAN channel supports CAN2.0 and CAN-FD Data output interface: USB or Ethernet Supply voltage: 9-36Vdc Analog input connector type: BNC Counter input connector type: Lemo 1B 7pin CAN input connector type: DSUB9, male

16 analog input channels, 2 counter input channels, 1 CAN/CAN FD input channels Maximum 128KS/s/ channel sampling rate, 24-bit AD resolution Supports voltage (±10V, ±1V, ±0.1V), voltage/IEPE/full-bridge/half-bridge/quarter-bridge strain gauges, platinum resistance thermometers, and potentiometers for direct input Input coupling: DC, AC: 0,1 Hz, 1 Hz, 3Hz, 10 Hz CAN channels support CAN 2.0 and CAN-FD Data output interface: USB or Ethernet Supply voltage: 9-36 Vdc Analog input connector type: Terminal Block with 10 pins Counter input connector type: Lemo 1B with 7 pins CAN connector type: DSUB9, male

16 analog input channels, 2 counter input channels, 1 CAN/CAN FD input channels Maximum 128KS/s/ channel sampling rate, 24-bit AD resolution Supports voltage (±10V, ±1V, ±0.1V), voltage/IEPE/full-bridge/half-bridge/quarter-bridge strain gauges, platinum resistance, and potentiometer direct input Input coupling: DC, AC: 0,1 Hz, 1 Hz, 3Hz, 10 Hz CAN channels support CAN 2.0 and CAN-FD Data output interface: USB or Ethernet Supply voltage: 9-36 Vdc Analog input connector type: DB37, female Counter input connector type: Lemo 1B 7-pin CAN input connector type: DSUB9, male

Based on GPS for position, velocity, and displacement sensing with a sampling rate of 100 Hz; USB, CAN, analog/digital, or NMEA 0183/DisplayPort (RS232) output / DisplayPort (RS232) input; Analog and digital outputs for speed and distance are fully programmable; Included: GPS/GLONASS antenna, cigarette lighter power cable, lockable USB cable, DB9 CAN output cable; Optional accessory: RTK upgrade kit.

3 Channel Isolated CAN-FD; Supports CAN/CAN FD with a maximum speed of 8Mbps;; Sensor Excitation: 5V/12V; Input Connector: :DSUB9;; Power Supply: 6-36Vdc.

8 analog input channels, 2 counter input channels, 1 CAN/CAN FD input channels Maximum 200KS/s/ channel sampling rate, 24-bit AD resolution Supports voltage (±10V, ±1V, ±0.1V), current (4-20mA and 0-20mA), and direct IEPE input Input coupling: DC, AC (1Hz, 150Hz); single-ended or differential with programmable gain Sensor excitation voltage: 0~24V unipolar or 0~±12V bipolar, programmable CAN channels support CAN 2.0 and CAN-FD Data output interface: USB or Ethernet Supply voltage: 9-36Vdc Analog input connector type: Lemo 1B 10-pin female Counter input connector type: Lemo 1B 7-pin CAN input connector type: DSUB9, male

High-Precision Automotive MEMS Inertial Measurement Unit Range: ±450°/s Acceleration Range Options: ±8 / ±16g

8 analog input channels, 2 counter input channels, 1 CAN/CAN FD input channels Maximum sampling rate for up to 200KS/s/ channels with 24-bit AD resolution Supports voltage (±10V, ±1V, ±0.1V), current (4-20mA and 0-20mA), and direct IEPE input Input coupling: DC, AC (1Hz, 150Hz); configurable single-ended or differential Sensor excitation voltage: 0~24V unipolar or 0~±12V bipolar, programmable CAN channels support CAN 2.0 and CAN-FD Data output interfaces: USB or Ethernet Supply voltage: 9-36Vdc Analog input channel connector type: :DSUB9, female socket Counter channel connector type: Lemo 1B 7-pin CAN channel connector type: DSUB9, male socket

8 analog input channels, 2 counter input channels, 1 CAN/CAN FD input channels Maximum 200KS/s/ channel sampling rate, 24-bit AD resolution Supports voltage inputs (±10V, ±1V, ±0.1V), IEPE direct input Input coupling: DC, AC (1Hz, 150Hz) CAN channels support CAN 2.0 and CAN-FD Data output interface: USB or Ethernet Supply voltage: 9-36 Vdc Analog input connector type: BNC Counter input connector type: Lemo 1B 7-pin CAN input connector type: DSUB9, male

High-performance data acquisition software built with Python, featuring integrated channel configuration, display interface, data storage, and export capabilities.

12-inch HD vehicle display; Power supply: 9-3 V DC; Resolution: 1280 × 800; Operating temperature: -20°C to +70°C, ≤85% RH.

High-Performance Switch 8 x 2.5G electrical ports, 2 x 10G optical ports PTP synchronization support

Thermocouple Adapters Supports: K, J, T, R, S, N, E, C, B; CJC: Integrated

High-Performance Data Acquisition Controller Built-in 8-inch high-resolution touchscreen, resolution: 1920x1200 4 CAN/CAN FD channels, 2x RS-232 interfaces, 1x RS-485 interface, 1x LIN interface 2x Gigabit Ethernet ports, 2x2.5G Ethernet port 2 USB 3.0 ports, 1xHDMI Built-in 100Hz GPS with dual-antenna support Built-in dual-antenna WIFI,5G Standard Mark input interface supporting external GPS displays Includes PPS output Standard 256G NVMe SSD and SD card slot Standard data logging and acceleration/braking test applications